MM160 / MM200 · MULTI-MATERIAL SERIES
MM160 / MM200 Multi-Material Channel Letter Benders
Run documented aluminum systems and ferrous-metal applications on one feeding, cutting, and dual-tool bending platform. Choose MM160 for working widths up to 160 mm or MM200 for working widths up to 200 mm.
Maximum material width
Aluminum thickness
Stainless steel thickness
Minimum bending radius
BUYER DECISION & FIT
When is MM160 or MM200 the right starting route?
Start with application fit, then confirm the exact material, geometry, tooling, and delivery scope in the quotation. For route and file preparation, review /channel-letter-benders/material-guide and /channel-letter-benders/file-preparation before sending your material and production file.
Best for
Sign shops that process aluminum profiles or coils alongside documented stainless steel, galvanized sheet, iron, copper, or channelume applications.
Choose by working width
Choose MM160 for work up to 160 mm. Choose MM200 when the required working width extends to 200 mm; no other model difference is published.
Not ideal for
A job that depends on a dedicated tooth-notching and edge-folding process, profile-frame forming, or a model-specific capability outside the published material and radius ranges.
SPECIFICATIONS
Compare MM160 and MM200
Both configurations use the same documented feeding, cutting, and bending platform. Their stated working-width limit is the only confirmed model difference. Highlighting marks a documented difference, not a superior model.
MM160
- Maximum material widthMODEL DIFFERENCE
- 160 mm
- Working principle
- Automatic feeding, straightening, cutting, and bending
- Application materials
- Aluminum, stainless steel, galvanized sheet, iron, copper, and channelume
- Aluminum thickness
- 0.3-1.2 mm
- Stainless steel thickness
- 0.3-1.5 mm
- Minimum bending radius
- R >= 3.5 mm
- Length accuracy
- 0.1 mm/m
- Supported file formats
- DXF, AI, PLT
- Cutting system
- Servo slotting and swing-angle milling cutter
- Bending system
- Servo alternating dual-blade system
- Total power
- 3000 W
- Machine size
- 1900 x 900 x 1600 mm
- Weight
- 570 kg
- Voltage
- 220 V
- Working air pressure
- 0.3-0.8 MPa
MM200
- Maximum material widthMODEL DIFFERENCE
- 200 mm
- Working principle
- Automatic feeding, straightening, cutting, and bending
- Application materials
- Aluminum, stainless steel, galvanized sheet, iron, copper, and channelume
- Aluminum thickness
- 0.3-1.2 mm
- Stainless steel thickness
- 0.3-1.5 mm
- Minimum bending radius
- R >= 3.5 mm
- Length accuracy
- 0.1 mm/m
- Supported file formats
- DXF, AI, PLT
- Cutting system
- Servo slotting and swing-angle milling cutter
- Bending system
- Servo alternating dual-blade system
- Total power
- 3000 W
- Machine size
- 1900 x 900 x 1600 mm
- Weight
- 570 kg
- Voltage
- 220 V
- Working air pressure
- 0.3-0.8 MPa
MACHINE EVIDENCE
Inspect the MM Cutting and Bending System
These machine-detail images were prepared from the supplied MM product documentation to help you inspect the documented machine mechanisms.
Swing-angle milling cutter
The documented 75 mm cutter handles cutoff work while allowing the cutting angle and speed to be adjusted for the aluminum input.
Carbide planer insert
The product specification documents an eight-corner carbide insert for stable slotting and practical reuse of each cutting edge.
Alternating dual bending tools
Interchangeable bending-tool sets cover aluminum systems and the documented stainless-steel and complex-shape workflow.
Finished-letter evidence
The supplied MM document includes this finished metal-letter sample as application evidence; submit your own file for a job-specific review.
FAQ
MM Questions Before You Request a Quote
What is the difference between MM160 and MM200?
The published product specification shows the same processing platform and operating ranges except for maximum material width: 160 mm for MM160 and 200 mm for MM200.
Which materials are documented for the MM series?
The product specification lists aluminum systems, stainless steel, galvanized sheet, iron, copper, and channelume. Exact profile geometry and temper should be reviewed before quotation.
Which drawing files can I send?
The published product specification lists DXF, AI, and PLT. Include material, thickness, return height, and minimum radius with the file.
REQUEST MM160 / MM200 PRICING
Confirm MM160 / MM200 for Your Production File
Tell us your material type, thickness, return height, minimum radius, working width, and a representative production file. The quotation will confirm MM160 or MM200, tooling fit, utilities, included items, support scope, and commercial terms. Submit the form to send these requirements securely to SENQ CNC; share files only after a confirmed email or WhatsApp conversation.
RELEVANT ALTERNATIVES
