RF130
Aluminum and Channelume Letter Bender
RF130 uses roller feeding, closed-loop correction, and rebound compensation for documented aluminum profiles, flat aluminum, and channelume up to a 130 mm side height.
Side height
Material thickness
Minimum bending radius
Total power
BUYER DECISION & FIT
RF130: Does This Bender Fit Your Shop?
Start with application fit, then confirm the exact material, geometry, tooling, and delivery scope in the quotation. For series choice and file preparation, review Material Guide and File Preparation before sending your material cross-section and production file. General return bending that lists this series is on Standard Channel Letter Bending. The Channel Letter Bender Price Comparison lists documented limits for all 11 models.
Best for
Aluminum profiles, flat aluminum, and channelume from 0.3–1.2 mm thick and up to a 130 mm side height in a roller-feed workflow.
Confirm before ordering
Send the material specification, side height, thickness, minimum radius, and file. Confirm other included accessories and the exact machine configuration in the quotation.
Not ideal for
Ferrous metals or side heights above 130 mm.
SPECIFICATIONS
RF130 Technical Parameters
Published RF130 parameters are listed below. Items marked for confirmation must be checked in the final quotation. How to read side height is on the Channel Letter Bender Price Comparison. This series does not promise a side height below 20 mm.
RF130
- Working principle
- Automatic feeding, slotting, and bending
- Application materials
- Aluminum profile, flat aluminum, and channelume
- Slotting angle
- 45°–135°
- Side height
- ≤130 mm
- Minimum bending radius
- R≥3.5 mm
- Material thickness
- 0.3–1.2 mm
- Total power
- 1500 W
- Machine size
- 2000 × 900 × 1550 mm
- Machine weight
- 300 kg
- Voltage
- 220 V
- Air pressure
- 0.3–0.8 MPa
- Included computer
- Ships with a computer; software installed and parameters set.
- Deviation from drawing
- Under 0.1 mm
- Supported file formats
- DXF, AI, PLT
MACHINE DETAILS
See the Feed, Bend, and Controls
Detail images below come from the RF130 technical material and show the documented machine mechanisms.
Roller feed and drive assembly
The documented roller-feeding system supports controlled material movement into the cutting and bending workflow.
Bending tool and forming area
This model-specific detail shows the working area used with the documented closed-loop correction and rebound-compensation workflow.
Operator controls
Slot depth is automatic. Start, feed, and retract are one button each. Other included accessories are confirmed in the quotation.
DELIVERY AND SUPPORT
Delivery, Warranty & Training
Warranty, training, dispatch, and export terms are line-wide and are written on Why Us.
Delivery
Standard configurations are prepared for dispatch on the schedule written in your quotation.
Warranty and CE marking
The 1-year warranty, lifetime technical support, and CE marking are line-wide; details are on Why Us.
Training and OEM/ODM
Training is at the factory, on site, or remote; standard OEM starts from 1 unit on a documented SENQ series, and ODM requests go through engineering review (OEM / ODM).
RF130 FAQ
Questions to Answer Before You Order
Which materials are documented, and when should we compare MM?
Aluminum profiles, flat aluminum, and channelume from 0.3 to 1.2 mm thick and up to a 130 mm side height are documented. Compare MM when you need additional metal types or a 160 mm or 200 mm working configuration; SENQ should verify the final series from your material and file.
What should we send for a feasibility review?
Send a representative file with the material type, side height, thickness, and minimum radius. SENQ will review feasibility and confirm any required material or tooling validation in the quotation.
What computer, software, and accessories are included with RF130?
RF130 ships with a computer, software installed and parameters set. Other accessories are confirmed in the order-specific quotation.
REQUEST RF130 PRICING
Confirm RF130 for Your Production File
Tell us your material type, side height, thickness, minimum radius, intended letter construction, and a representative file. The quotation will confirm RF130 configuration, other accessories, tooling, utilities, support scope, and commercial terms. Submit the form to send these requirements securely to SENQ CNC; share files only after a confirmed email or WhatsApp conversation.
RELEVANT ALTERNATIVES